3157 products were found matching your search for Comfort Solutions in 1 shops:

The 3-Speed Service Pump is specially designed to make short work of service calls since it replaces the most commonly used circulators. It features a removable, uni-body Integral Flow Check that maximizes flow, as well as prevents gravity flow, even in the tallest buildings. Wiring is a snap thanks to an extra roomy capacitor box and convenient dual electrical knock out connections.

The 5000 Series Mixing Valve is a dual-purpose mixing or diverting valve. It is ASSE 1017 approved, providing shut-off reliability on either a hot or cold-water supply failure. The high flow and low head loss characteristics make the 5000 Series ideal for domestic water, radiant applications, installations with large variations in flow rate and supply conditions, and installations requiring tightly controlled water temperature. The valves unique design and advanced thermostatic element ensures a stable mixed water temperature throughout the extended 85 degree F - 150 degree F range. The 5000 Series provides fail-safe security and the ultimate performance in a mixing valve.

The Taco 006 is designed for circulating hot or chilled fresh water in open or closed loop applications. Typical uses include hydronic heating, domestic hot water recirculation, hydro-air heating/cooling, heat recovery units, water source heat pumps, drain down open loop Solar systems and potable water applications. The unique, replaceable cartridge contains all of the moving parts and allows for easy service instead of replacing the entire circulator. The compact, low power consumption design is ideal for high efficiency jobs.

Perfect for systems with a tank water heater and dedicated hot water return line, the SmartPlus-e combines the high-efficiency of the ECM circulator and the intelligence of the award-winning SmartPlug Instant Hot Water Control. A one-two punch that delivers instant hot water comfort while saving energy and water - up to 12,000 gal. a year. With SureStart automatic unblocking and air purging, you can expect years of trouble-free performance from Taco, the leader in reliability. -Install it, forget it.

The TacoGenie delivers hot water to faucets and taps at your command, and can save the average family of 4 up to 12,000 Gal. per year. The TacoGenie is a small, silent pump that attaches to the hot and cold water lines in the cabinet under the most remote kitchen or bath fixture in the home. When the TacoGenie is activated, the cool water you normally let run down the drain is recirculated back to the water heater through the cold water line. When the hot water arrives at the faucet, the TacoGenie heat sensor and control board shut off the pump to prevent pumping excess hot water into the cold water line.

The Taco 0011 is specifically designed for high head / medium flow applications in large residential or light commercial closed loop hydronic heating and chilled water cooling systems. Ideal for high pressure drop boilers, fan coil units, heat exchangers, large radiant heating and heat recovery/geothermal systems. The Stainless Steel 0011 should be used on open loop systems. The unique replaceable cartridge contains all of the moving parts and allows for easy service instead of replacing the entire circulator. Universal flange to flange dimensions and orientation allows the 0011 to easily replace other models. Compact, low power consumption design makes it ideal for high-efficiency jobs.

This Hot-Link valve goes with a Hot-Link System. Hot-Link System comes with 1 valve but sells extra valves separately in case you want 1 then 1 location to work with Hot-Link. A quiet and efficient Hot-Link circulator is installed at the water heater and a Hot-Link bypass valve is easily installed at the faucet furthest away from the hot water heater. The thermal disk technology tells the Hot-Link bypass valve what to do. No under sink electricity is needed.

The 0015e3 is a variable speed, high-efficiency wet rotorcirculator with an ECM permanent magnet motor. Its ECMperformance is equivalent to the Taco 0015 3-Speed circulator.It is ideal for hydronic systems zoned with circulators or zone valvesor used on potable water systems for domestic water recirculation.The 0015e3 is not suitable for chilled water systems.

Taco's PRV (Boiler Feed Valve) is designed for use in today's Hydronic heating systems. The model 3350 PRV reduces incoming pressure and automatically maintains the system pressure to the valve's adjustable set point. If the system pressure drops below the valve's set point it will automatically add water to the system. It is suitable for systems with fill pressure requirements between 10-50 psi. The Taco PRV showcases a fast fill button with automatic reset. The valve automatically exits the fast fill mode once the system is full and the desired set pressure is reached. No more manually holding the valve open or locking it in an open position, possibly over pressurizing to the point of setting off the relief valve. Material: Brass.

Taco 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. The 007e is everything you love about the 007. It is ideal for hydronic systems zoned with circulators or zone valves. The 007e delivers the performance equivalent of the 007 plus the reliability and easy installation that made the 00 famous. Install it, forget it.

The TACO Integral Flow Check Valve is constructed of plastic. It is designed for use with the 00 Circulator pump series as a replacement gasket, features a rubber O-ring and flocheck. Insert the flocheck into the circular pump to make a check valve that separates different zones of heat.

The patented SmartPlug lets you upgrade any existing hot water recirculation pump with a power cord to Smart operation. Simply connect the SmartPlug to any 110-Volt power outlet then plug the circulator power cord into the SmartPlug. Using a sensor that mounts to the hot water supply pipe, the SmartPlug will record the daily hot water usage pattern in a home and adjust the circulator run time automatically. Hot water will always be available when needed.

The Taco Air Scoop is specifically designed to provide a noiseless, air-free hydronic heating, cooling or combination system, by efficiently separating out the air from the water in any of these systems. Taco Air Scoop's enlarged design with internal baffles slows the water velocity in order to separate the air from solution. The TACO 1-1/4 in. Air Scoop features a 1-piece, cast-iron construction.

Taco's 4900 Series of air elimination products deliver the most complete and effective means of air removal on the market. The ultimate micro-bubble separation of the PALL Ring Process eliminates the damaging effects and irritating noise caused by unwanted system air. They require no minimum run of pipe and have a convenient 1/2" tapping for easy installation of an expansion tank.

Use these long-lasting Taco Rubber Gaskets to seal connections to flanges in your circulator pump. Use with flanges and hardware to help keep your boiler's circulator pump running at optimal efficiency. Creates a tight seal at flanges.

Enjoy instant hot water comfort while avoiding a major renovation. The Hot-LinkPlus-e system installs easily into existing plumbing with a tank water heater. No dedicated hot water return line is needed. The system combines the ECM high-efficiency 006e3 hot water circulator with the award-winning SmartPlug Instant Hot Water Control and Hot-Link Valve for maximum comfort and efficiency. Enjoy water savings of up to 12,000 gal. per year. You can expect trouble-free performance reinforced by SureStart automatic unblocking and air purging. Ideal for retrofits, the Hot-LinkPlus-e requires no programming and is built with the reliability that's made Taco famous. - Install it, forget it.

Hot-Link is a quick, easy retrofit using the existing plumbing. Mount the valve under the sink and the pump at the water heater. The valve's unique thermal disk technology sends cooled water back to the water heater so hot water lines remain hot. There's no need to remove the Hot-Link valve from the piping to keep it clean. Our exclusive clean-in-place design makes short work of keeping the system operating properly. Download the Hot-Link brochure to get all the details.

The 007-IFC is designed to simplify piping, reduce installation costs and improve system performance when zoning with 00 circulators. By locating the IFC inside the pump, a separate in-line flow check is eliminated. The low pressure drop of the IFC increases flow performance vs. in-line flow checks. Both the IFC and the cartridge are easily accessed for removal and service.

Taco Zone Sentry zone valves provide on-off, normally open or normally closed control in closed hydronic systems. The valves can be used in a wide variety of heating and condensing cooling applications. They are primarily designed for use with baseboard, fan coils, radiators, convectors, air handlers, heat pumps and radiant applications. Material: Brass.

The Taco Switching Relay is the best choice for all you zoning needs, with advanced PowerPort Cards, external diagnostic lights, switchable priority and contractor friendly PC board layouts. Combined with the time proven reliability of the 00 family of circulators and thermostats, total system integrating is achieved. External indicator lights provide instant diagnostic feedback, making a snap of service calls or new installation start-ups.